Good day
I made it for the Americans but maybe it can help some beginners here...
I will refer only to the 3 basic types of hinges:
1. Full overlay – the door fully covers the cabinet frame (the hinge side wall)
2. Half Overlay – the door covers only half of the cabinet frame…used when two doors are installed on one cabinet wall.
3. Inset – used for, well…..inset doors…
All the dimensions are “Plus-Minus” you don't need to be “Super-Duper accurate” to get a perfect fit…the door can be adjusted in 4 axis; up-down…in-out…left-right and clockwise-counter clockwise
On this post, I'll show the 3 types of hinges and the drilling method
On the 2nd post, the actual drilling and installation of the hinges and the doors
Regards
niki
I made it for the Americans but maybe it can help some beginners here...
I will refer only to the 3 basic types of hinges:
1. Full overlay – the door fully covers the cabinet frame (the hinge side wall)
2. Half Overlay – the door covers only half of the cabinet frame…used when two doors are installed on one cabinet wall.
3. Inset – used for, well…..inset doors…
All the dimensions are “Plus-Minus” you don't need to be “Super-Duper accurate” to get a perfect fit…the door can be adjusted in 4 axis; up-down…in-out…left-right and clockwise-counter clockwise
On this post, I'll show the 3 types of hinges and the drilling method
On the 2nd post, the actual drilling and installation of the hinges and the doors
Regards
niki