dewalt dw733 the motor wouldn't rise or go down

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

modees31700

New member
Joined
8 Jun 2012
Messages
2
Reaction score
0
Location
scotland
HI All
have a dewalt thicknesser dw733 was working fine and a few days ago did try to rise the motor up but the arm is totaly stuck near the bottom and wouldn't move at all up or down, did checked all alignment with some kind of spirit level and they seems ok not sure how to dismanlt it or remove the motor to check if there is any damage to the alignment or any thing else, has any one had this issue before with dw733 ,
Many Thanks for your help in advance, Adam
 
Back
Top