I bought from eBay a Delway floorboard tongue cutter and floor board lifter. They were both about £5 so won't break the bank if they don't live up to my high expectations. I wonder if anyone has the instructions for the tongue cutter that they could let me have a look at?
I'm sure you pop it into the gap and with the heel boot it along, however, it would be nice to see the 'official' way you use it before I have a go in earnest.
Equally would appreciate any comments from anyone who has used one / uses one. If it works, it will be one of the best tools I've ever bought. If I had a pound for each occasion I've found pipes and electrics run over the top of joists and held down by the floor boards......makes setting the depth of the circular saw rather critical and this would be I hope safer, quicker, less noisy and cleaner.....but then again may be not!
I'm sure you pop it into the gap and with the heel boot it along, however, it would be nice to see the 'official' way you use it before I have a go in earnest.
Equally would appreciate any comments from anyone who has used one / uses one. If it works, it will be one of the best tools I've ever bought. If I had a pound for each occasion I've found pipes and electrics run over the top of joists and held down by the floor boards......makes setting the depth of the circular saw rather critical and this would be I hope safer, quicker, less noisy and cleaner.....but then again may be not!