crown guard extraction?

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jhwbigley

Established Member
Joined
15 Aug 2008
Messages
745
Reaction score
0
Location
lincolnshire
Anyone know where i can get one of those metal things that allow dust extraction to fit onto your existing crown guard on the ts?

thanks guys

John-Henry
 
Do you mean one of these;

3843409224_cf18a28bc7.jpg


If you do, then Axminster have them.

Ed
 
EdSutton":15l26vzo said:
Do you mean one of these;

3843409224_cf18a28bc7.jpg


If you do, then Axminster have them.

Ed

well, i will need one of those, but i mean the crown guard itself, a hose adaptor that you pop rivet on.

thanks any way Ed


John-Henry
 
I think Axminster do a after market crown guard with extraction port as well as the fitting that Ed showed.
 
I'm not aware of one that you can buy that will fit directly on your riving knife. Axi do the guard boom thingy but it's quite spendy (tho if I had a TS in a fixed position, I'd have one).

Making one should be quite straight forward.
 
BradNaylor":tdof70g4 said:
I had the crown guard on my Wadkin AGS adapted by a local metalworker to take a dust extraction port.

Workshop16309006-1.jpg


It worked so well that I kept it when I sold the saw and fitted it to my SCM. Cost about £20 IIRC

Brad

that looks like the job, how big is the hose on that Brad?

my guards alu so i'll have to someone with a tig...

John-Henry
 
The whole thing could be fabricated if you didn't want to mod the alu one.
 
Back
Top