Clips for Lidl track saw rail

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

galleywood

Established Member
Joined
24 Feb 2015
Messages
398
Reaction score
28
Location
Chelmsford
Has anyone come up with a design of clip to keep, a Lidl/Parkside track saw guide rail, up against a parf style dog?
The UJK ones are not compatible with the Lidl rail.
 
I just bought a Festool rail, they're pretty cheap by Festool standards. About £50 for an 800mm
 
The lidl saw runs great on a festool track, that's where I mostly use mine. It joins well to the lidl track too if you need a longer track.
 
One thing to point out though, is that you really need a lot of space for it to work, and ideally a longer track. Because the saw motor butts into the parf dog, you only get about 75% or the track to use. So on an MFT type top, it's only about 500mm (unless you use the table the other way, but then the work dangles off).
 
Back
Top