Built a framesaw

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Philipp

Established Member
Joined
3 Nov 2005
Messages
81
Reaction score
0
Location
Via strata montana
Hi folks,

just some pics of my recently built framesaw supposed for ripping wood.

Frame from cherry with halv-blind dovetails.

The piece of apple wood was ripped within a few minutes.


Thanks for looking and regards

Philipp

B1349.jpg



B1350.jpg



B1351.jpg
 
It looks like it does a good job so well done.

I can't make out the construction methof for the corner joints.
#-o Just re- read your test

Andy
 
Hi Andy,

Thanks for your post.

With regard to the corner joints: the longitudinal parts are connected to the cross parts with halfblind dovetails. I admit that these are difficult to see in the pictures. If you look carefully at pic 2 you can see the dovetails and the marks from the marking gauge. Next time I'll chose different woods for better visibility of the joints :D

Regards, Philipp
 
Back
Top