woodcarver
Established Member
A customer has asked me to make some bi-fold wardrobe doors, aperture 2300 high x 1460 wide.
There will be two doors on each side approximate 365mm each.
What can I make these doors out of?
The door track I have say a minimum of 20mm for the door thickness.
Ordinary mdf is too heavy. Ultralight I would be concerned about the mdf remaining straight over that height.
Another option would be to fabricate my own by making a frame work and skinning it with mdf or similar.
Has anyone got any suggestions on this one?
Regards
There will be two doors on each side approximate 365mm each.
What can I make these doors out of?
The door track I have say a minimum of 20mm for the door thickness.
Ordinary mdf is too heavy. Ultralight I would be concerned about the mdf remaining straight over that height.
Another option would be to fabricate my own by making a frame work and skinning it with mdf or similar.
Has anyone got any suggestions on this one?
Regards
