Quantcast

Bandsaw set up

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

Lumberman

Established Member
Joined
2 Aug 2011
Messages
99
Reaction score
5
Location
Kingston upon Hull
I thought I had tried everything concerning the setting up of my bandsaw, until I read somewhere that maybe the blade
may not be aligned up to the head travel, but the article I read did not elaborate. I am not sure what this means or how to go about rectifying this can anyone please enlighten me.

Harry.
 

DaveyP

Established Member
Joined
2 Aug 2011
Messages
168
Reaction score
0
Location
Dumfriesshire
Hi Harry

Enlightenment = Don't worry about every thing you read :D

If the blade is square to the table (side to side and front to back.. then all is well)
 

woodpig

Established Member
Joined
17 Sep 2011
Messages
2,433
Reaction score
0
Location
Dorset
Not sure either but I'll take a guess if it helps ... :? Perhaps it means that the blade is not the same distance to the guides in all positions. Easy to check but don't know how to rectify if you have a problem!
 
Top