Charlie Woody
Established Member
I am working my way through Steve Maskery's bandsaw dvd and have come across the following difficulties, see photos below:
I cannot get at the nuts to remove the bearing guide for cleaning. What type of spanner / socket do I need to fit inside to get at this nut please?
Due to the frame of the saw I cannot check for coplanar. How do I work around this please?
The tracking adjuster / wheel seems to have seized as if I tighten and then release it does not return to the previous position.
I have removed the spring clip (not sure if that is correct term!) but the wheel does not come off. Without taking if off I don't know how I can clean and lubricate it. Any ideas please?
Hope some one can help me with this please.
![011.jpg 011.jpg](https://cdn.imagearchive.com/ukworkshop/data/attach/6/6146-011.jpg)
I cannot get at the nuts to remove the bearing guide for cleaning. What type of spanner / socket do I need to fit inside to get at this nut please?
![012.jpg 012.jpg](https://cdn.imagearchive.com/ukworkshop/data/attach/6/6147-012.jpg)
Due to the frame of the saw I cannot check for coplanar. How do I work around this please?
![013.jpg 013.jpg](https://cdn.imagearchive.com/ukworkshop/data/attach/6/6148-013.jpg)
The tracking adjuster / wheel seems to have seized as if I tighten and then release it does not return to the previous position.
![014.jpg 014.jpg](https://cdn.imagearchive.com/ukworkshop/data/attach/6/6149-014.jpg)
I have removed the spring clip (not sure if that is correct term!) but the wheel does not come off. Without taking if off I don't know how I can clean and lubricate it. Any ideas please?
Hope some one can help me with this please.