Quantcast

your assistance please - router magazine

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

Allthunbs

New member
Joined
22 Jan 2012
Messages
2
Reaction score
0
Location
Quebec Canada
Good Morning:

I'm looking for information and availability (hopefully online) of an old "Router" Magazine. There were quite a few articles written for them by Jack Cox using the Trend pivot frame.

I have a few pages showing different products using the pivot frame but insufficient information to learn how to do it. Is there some place where these magazines are either available digitized or in print?

Thank you for your assistance.

Allthunbs
 

MickCheese

Established Member
Joined
29 Sep 2006
Messages
2,438
Reaction score
0
Location
High Wycombe, Bucks
I think in a dark and dusty corner somewhere I have some router magazines. Have you any idea around what date I should have a look?

Mick
 

Losos

Established Member
Joined
24 Aug 2004
Messages
1,469
Reaction score
0
Location
West Suffolk
I have a few copies of 'The Router' magazine (Not a complete set by any means) if you have a rough idea of what dates I'll check and I assume this magazine is no longer published.
 

foxhunter

Established Member
Joined
10 Dec 2011
Messages
337
Reaction score
0
Location
Reigate, Surrey
February/March 2004; April/May 2004; August/September 2007.
Not forgetting Jack Cox's book - Decorative Routing. I have to say however, that I find his methods and descriptions very confusing.
If you continue to have problems let me have your email address and I will copy the above magazine extracts.

Brian
 

Allthunbs

New member
Joined
22 Jan 2012
Messages
2
Reaction score
0
Location
Quebec Canada
HI again:

All of my examples are stored in *.pdf files and this site doesn't take *.pdf files. It took me a bit but I think you might be able to see this example OK. There are several other pictures but this I think is demonstrative. Each of these appears to be pieces, cut and assembled. Any suggestions???

Thanks for the help.

Ron
 

Attachments

Top