Excellent quality restored and used Union Jubilee wood turning lathe
See photos for overall condition and type, it is very good condition, it came to me just over a year ago in quite a poor state, it had been standing it an old workshop for over 20 years unused.
Its been used by myself infrequently mainly for turning tool handles over the last year
I have cleaned it up and restored it as follows
Rather than repainting I gave the paintwork a coat of clear lacquer.
Bearings were removed and replaced with new
Has new drive belt
I removed rust from bed as indicated
I have filed tool rests smooth
I'm only selling as upgraded to a Graduate, whilst I have room for 2 lathes I wouldn't use both.
It has 240V motor on it, all works well as indicated in video ebay link - UNION JUBILEE 240 V WOOD TURNING LATHE GOOD RESTORED CONDITION | eBay
Notes
Its missing one grease cap for bearings
The thread on headstock is worn as indicated but still very usable I have used a chuck on it.
Also included
Face plate as indicated
A small hydraulic jack for lifting the motor to assist when changing speeds
I'm based in Chichester West Sussex
I could deliver up to about 50 miles away but will need 65p/mile each way to cover petrol etc
I can dismantle and assist loading - will fit into hatchback/estate car - it is heavy though
Looking for £ 400.00 on here - (currently listed on ebay for £ 449.00)
See photos for overall condition and type, it is very good condition, it came to me just over a year ago in quite a poor state, it had been standing it an old workshop for over 20 years unused.
Its been used by myself infrequently mainly for turning tool handles over the last year
I have cleaned it up and restored it as follows
Rather than repainting I gave the paintwork a coat of clear lacquer.
Bearings were removed and replaced with new
Has new drive belt
I removed rust from bed as indicated
I have filed tool rests smooth
I'm only selling as upgraded to a Graduate, whilst I have room for 2 lathes I wouldn't use both.
It has 240V motor on it, all works well as indicated in video ebay link - UNION JUBILEE 240 V WOOD TURNING LATHE GOOD RESTORED CONDITION | eBay
Notes
Its missing one grease cap for bearings
The thread on headstock is worn as indicated but still very usable I have used a chuck on it.
Also included
Face plate as indicated
A small hydraulic jack for lifting the motor to assist when changing speeds
I'm based in Chichester West Sussex
I could deliver up to about 50 miles away but will need 65p/mile each way to cover petrol etc
I can dismantle and assist loading - will fit into hatchback/estate car - it is heavy though
Looking for £ 400.00 on here - (currently listed on ebay for £ 449.00)
