Quantcast
  • We invite you to join UKWorkshop.
    Members can turn off viewing Ads!

ts250 table saw

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

boschboy

Established Member
Joined
16 Feb 2019
Messages
69
Reaction score
0
Location
liverpool
help guys I have the axi ts250 table saw can I ask if anyone has one I have a couple of problems first one blade no spinning up seems belt slips I can turn the blade very easy without the motor going to order a new belt for it how the hell do you get it of the machine to replace or adjust the tension on it
second one been given the fence upgrade but no fitting guide can anyone help cheers
 

Bodgers

Established Member
Joined
21 Dec 2014
Messages
1,866
Reaction score
0
Location
North Yorks
This is a link to the manual:

https://www.axminster.co.uk/media/downl ... manual.pdf

Take the side panel off and look at page 27 of this manual.

I believe MikeG gave you advice on the belt on the other thread as well.


As for fitting the fence, is it the Charnwood one? I fitted another fence to my TS200 and they don't give specific instructions as every machine is different. Likely you will have to drill and tap holes and threads into the cast iron lip to mount it.
 

boschboy

Established Member
Joined
16 Feb 2019
Messages
69
Reaction score
0
Location
liverpool
thanks for your reply the fence is the axi one there are two brakets missing that hold it onto table and I think your right about drilling table to fit it
 

sunnybob

wysiwyg
Joined
11 Oct 2014
Messages
8,399
Reaction score
157
Location
cyprus
Any chance of an occassional full stop and capital letter in there? I got out of breath reading it. :shock: #-o
 

Bodgers

Established Member
Joined
21 Dec 2014
Messages
1,866
Reaction score
0
Location
North Yorks
boschboy":215hiq9t said:
thanks for your reply the fence is the axi one there are two brakets missing that hold it onto table and I think your right about drilling table to fit it
Axminster will sort it

Sent from my Redmi Note 5 using Tapatalk
 

boschboy

Established Member
Joined
16 Feb 2019
Messages
69
Reaction score
0
Location
liverpool
Axminster don't have the parts in stock . They said it would be around may before they could get hold of them and there £20 each is it worth it. my just sell the saw on let someone else play around with
 

Bodgers

Established Member
Joined
21 Dec 2014
Messages
1,866
Reaction score
0
Location
North Yorks
boschboy":u52v3892 said:
Axminster don't have the parts in stock . They said it would be around may before they could get hold of them and there £20 each is it worth it. my just sell the saw on let someone else play around with
Can't you just use it with the fence that's currently on it until you get the bits?

The standard fence isn't perfect, but it will do for now...
 

boschboy

Established Member
Joined
16 Feb 2019
Messages
69
Reaction score
0
Location
liverpool
no only have the rails no fence parts trying to find a photo or the size of the brackets see if I could get someone to make them there must be someone on here with the same fence system
 
Top