Spraying a garden fence

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Born2bye

Established Member
Joined
12 Sep 2016
Messages
26
Reaction score
0
Location
Telford
Hello all

I am thinking of using my compressor and a spray gun to spray paint all my fence panels with a product like Ronseal
Can anyone advice me please on what nozzle size I should use on my gun, i.e. 1.3,1.8,2.2 etc
 
Dont know about nozzles etc but be very careful as the overspray can get onto cars and neighbouring houses, and can be very difficult to remove.
 
Plus there will be air born particles that you can't see so use a good mask. I use just old pump up bottle and those particles are not as fine but i still wear a mask.
 
I have bought small plastic pipe and sheeting, only cost me £20.00 to build a spray booth, each panel will be inside the booth so this will stop any overspray, I also have a protective suit and the correct PPE
 
Back
Top