Spalted silver birch bowl

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

EnErY

Established Member
Joined
7 Oct 2012
Messages
528
Reaction score
0
Location
South Wales
here is my spalted Silver birch natural Edged Bowl finished with 3 Coats Of sanding sealer 3 coats Of Friction Polish and A Wheelbarrow of carnauba wax then Burnished With Shavings On The Lathe My Photography is as useless as my turning but I hope you at least enjoy what you can see
Regards
Bill
 

Attachments

  • 100_0586.jpg
    100_0586.jpg
    57.4 KB
  • 100_0587.jpg
    100_0587.jpg
    55.7 KB
Bill, that bowl looks great!. Loving the different colours that run through it, that's definitely what is known as Spalted!. Great finish too!.
 
Looks like you have managed to do a good job with that Bill.
Finish looks good on it.
Could you have taken the bowl deeper :?:
 
Paul.J":6b5erx7f said:
Looks like you have managed to do a good job with that Bill.
Finish looks good on it.
Could you have taken the bowl deeper :?:
Paul
Thanks for comments but With The bowl being 3 Inch deep at its highest point I left just Over 1/4 inch with the dovetail recess this bowl I turned green as grass in woodys workshop back in October and left it in a bag of shavings until today when I finished it as I said my photographic mind is not the best and its very deceiving as to how deep it actually is I didn't go too thin unless it cracked and I lost all the bark I hope this explains it more clearly
regards
Bill
 
Thank you People for all your comments all taken onboard and as you say steven its nice to get back on the lathe but I still got to take it easey incase I damage it anymore than it is at the moment but im taking things slowly
Regards
Bill
 
Back
Top