• If you have bought, sold or gained information from our Classifieds, please donate to UK Workshop and give back.

    You can become a Supporting Member or just click here to donate.

Small Workshop Clearout Pt.1 (Surrey)

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Sold bits have been posted with reference number sent, mini Bessey pipe clamp clones sold pending collection

Surreycabinetry":26kt41qq said:
Evening, im based in Shere, so not far from Dorking. Id be interested to see what else you have for sale.

I'll do a 2nd post listing all the bigger stuff that has to be collected :D


woodcarver":26kt41qq said:
Hi I would be interested in pin nailer if still available

The 18G brad nailer is still available, headless Pinner had sold PM me if you'd like the brad nailer, thanks

Chippymart1":26kt41qq said:
Hi Chris, i'm in Guildford, can i come and have a look at what you've got? The block plane is of interest and maybe o few other bits
cheers martin

Hi Martin, of course. This week is a bit manic but I will send you a PM with times I'm available. Cheers
 
Mutley Racers":164et9ua said:
Hi. Are the pipe clamps still available at all?

If you mean the Bessy copy pipe clamps (red ones) then no, sorry I've collected them already.
 
Hi mate have you still got the digital angle finder.
Thanks so much.
Tim.


chris-a":c769zcwr said:
Closing up shop so slowly starting to get rid of all things starting with the smaller bits;

(Items for collection from either Fetcham or Dorking in Surrey)

Axminster Air AW50N 18G Brad Nailer

All works completely as it should, but pretty grubby. I will give it a quick clean and grease before I send it off. Served me well I think it has literally had 2 misfires from tens of thousands of nails but switched to a Dewalt with pinpoint non marking head
£28 posted
yOU1VOF.jpg

1eXZmOr.jpg

CkQr0i0.jpg

7GLpm0s.jpg



New Axminster BS 13A Plug & Socket NVR Switch

£25 posted
TZ16kUy.jpg

EIgeyv0.jpg


Kunys Ap622 Toolbelt
Could never get used to a tool belt so again this is barely used but has been sat in my workshop so its a bit grubby
£25 posted
weEmNAJ.jpg

MLE5Yt0.jpg

ryoUhOg.jpg

zkhXmmT.jpg



JUUMA One Handed Quick Action Bar Clamp Opening 900 mm

£10 collected

XSDbGsz.png

lNkAQNt.png

SIPVygW.jpg



JUUMA Pipe Clamp for 3/4 inch Pipes

Ordered from FineTools in Germany this is a nice piece of kit, does not need a threaded pipe end.
Comes with 2 steel pipes about 1.5m each and can be joined for a super-clamp
£30 collected

3aHpLFR.jpg

M68niwu.jpg

qDkrHMo.jpg

cuhqdul.jpg



Forge Steel Spreader Clamp & 9'' Spring Clamps
As title
£15 collected
B8hbJ7Z.jpg

WbdgM1m.jpg



Lie Neilson Low angle block plane
Good condition, minor discolouration on the sole
£125 posted
KzKECez.png

RsBH6bq.png

JWThcKC.png

crNANog.png

kvvgD8X.png


16amp extended cord
£11 posted
oZWEmBL.png


16amp split connected for 2 machines on 1 plug
£11 posted
2RUnkRS.png


Digital Angle finder
£13 posted, marked on the front and back but purely cosmetic, works fine
LI5u9ki.png


2 x ebay pipe clamps (Bessey copies)
With 6 x pipes to extend them
£20 collected
JndLbIb.png

laaf4kI.png

g60kQq4.png


FOLLOWING BITS ARE FREE TO ANYONE WHO COLLECTS AN ITEM (probably have more bits too)
O9pGSbC.png

s63F5pD.png


Collection from either Fetcham or Dorking in Surrey

Have a few more bits, clamps, extractors, router tables, compressors etc etc so will do a Part 2 with larger items soon
 
tinytim1458 said:
Hi mate have you still got the digital angle finder.
Thanks so much.
Tim.

Hey Tim sorry for my late reply - yes I do, shoot me a message if you're still interested. Cheers,
Chris
 
Mutley Racers":23klkztw said:
Hi, is the Jouma pipe clamp still available?

Cheers

It is indeed still available :)
Yosarian":23klkztw said:
Please could I have the NVR switch? Thanks.

Sent from my SM-N950F using Tapatalk

PM replied to
 
Sold items removed and prices reduced on some of the pieces. Creating a second thread for other items.

Thanks to everyone who has purchased so far, everyone has been excellent to deal with!
 
Hi Chris is the brad nailer still available? I am also after a couple of stanley planes no4 through to 5 1/2 I will not be home until Monday eve to complete if any items are available. Regards Glenn
 

Latest posts

Back
Top