pops92 Established Member Joined 10 Oct 2016 Messages 293 Reaction score 75 Location Boston Lincolnshire 21 Mar 2021 #1 Advice please on the best method or your method used to secure a turned handle to a turned lignum vitae mallet head. Any input welcome please
Advice please on the best method or your method used to secure a turned handle to a turned lignum vitae mallet head. Any input welcome please
Phil Pascoe Established Member UKW Supporter Joined 29 Jan 2012 Messages 27,455 Reaction score 6,832 Location Shaft City, Mid Cornish Desert 21 Mar 2021 #2 Mine are glued.
Doug B Shy Tot Joined 6 Aug 2008 Messages 5,814 Reaction score 11,597 Location @dougsworkshop 21 Mar 2021 #3 I used a metal rod glued into both the head & handle with Araldite, posted a wip here https://www.ukworkshop.co.uk/threads/lignum-mallet.129082/
I used a metal rod glued into both the head & handle with Araldite, posted a wip here https://www.ukworkshop.co.uk/threads/lignum-mallet.129082/
marcros Established Member Joined 11 Feb 2011 Messages 11,302 Reaction score 745 Location Leeds 21 Mar 2021 #4 wedged and glued
Orraloon Established Member Joined 18 Oct 2016 Messages 1,615 Reaction score 920 Location Blue mountains Australia 22 Mar 2021 #5 Just wedged for me. Leave the thick end of the wedge a bit proud at the top so there is room to thghten it up some more at a later date if required. Regards John
Just wedged for me. Leave the thick end of the wedge a bit proud at the top so there is room to thghten it up some more at a later date if required. Regards John