proxxon 2speed saw

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rayben

Established Member
Joined
9 Dec 2016
Messages
23
Reaction score
0
Location
merseyside
I an earlier post I told you about the clamps not holding the blades ie when tensioning the blades were slipping out of the clamps unless I inserted a piece of sandpaper/emerypaper in with the blade,axminster posted me 2 new clamps it was only when fitting the new clamps that I noticed the chrome bit that sits on top of the clamp in the recess that the chrome plates were to wide and stopping the clamps closing properly thus not gripping the blade with sufficient force as to hold them.Hope this helps anyone that might come across the same problem.I have informed axminster.
 
Back
Top