kity 636 planer thickneser

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

moby

Established Member
Joined
17 Jan 2013
Messages
72
Reaction score
0
Location
lancs
keeping it simple, any good?

been turning 2 years now, would probably use it once/twice a week. on sale for about £150.
 
Yes, they're OK. An old model now, but you can still get spare blades from Axminster. Like most PTs adjusting the blades after sharpening is a pain and there's no short cut with newer jigs as they don't fit on the small diameter cutter block.

Chip/dust extraction is a bit primitive by modern standards, but a little DIY sorts it out. You will need a chip extractor if you expect to use is for any moderate quantity of timber.

Once set up correctly it will deliver straight square timber.
 
Back
Top