i-pad pro stand idea

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

thetyreman

Established Member
Joined
4 Mar 2016
Messages
4,578
Reaction score
1,520
Location
earth
made an i-pad pro stand for my dad, thought I'd share it, it's very simple just a groove in some redwood pine which was spray lacquered with clear gloss, it should come in handy.

I used hand tools for it all, mortise gauge to mark out the lines, chisel to chop out the waste then followed by the hand router with 1/4" blade to get it down to final depth, edges rounded off with a rasp then flat bast-uard file.
 

Attachments

  • i-padprostand_finished-10.jpg
    i-padprostand_finished-10.jpg
    925 KB · Views: 241
  • i-padprostand_finished-6.jpg
    i-padprostand_finished-6.jpg
    720.7 KB · Views: 241
  • i-padprostand_finished-5.jpg
    i-padprostand_finished-5.jpg
    662.1 KB · Views: 241
  • i-padprostand_finished-4.jpg
    i-padprostand_finished-4.jpg
    662.9 KB · Views: 241
  • i-padprostand_finished-1.jpg
    i-padprostand_finished-1.jpg
    686.7 KB · Views: 241
Nice and clean design. I wouldn't personally want it only because I'm a clumsy twit (homer) and fear I would end up folding the edge of the iPad in the slot with disastrous results. :shock:

Pete
 
Back
Top