Hot melt glue

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Harlequin

Established Member
Joined
20 Sep 2008
Messages
386
Reaction score
0
Location
Leeds
There was a query here a while ago on the use of hot melt glue to hold stuff on the lathe while turning.
It must be remembered that this is a low strength tack but used with this in mind and with care can be an effective solution sometimes.

Link

https://m.youtube.com/watch?v=aHt0p2P9imw
 
I've lost my hot melt glue gun somewhere so I used double sided tape for a project yesterday and it worked well. Some small bits of adhesive left after removing the tape came off easily with some thinners. Must sort out that glue gun though!
 
Back
Top