HELP

[user 19915]

Iv,e bought a old record power rst s12 table saw and require a few part,s and if possible a manual for indication of the part,s name,s and no any help regarding this would be most appreciated
thank,s in anticipation Mock

 

[user 19915]

kiwi1 Can the person who wrote this get in touch please i have the same problem with my record power rst s12 table saw


Hi Re. the LUTZ table saw.

Have you resolved the problem yet ?
I have one of these machines branded as Record Power RSTS12. Neither Lutz or Record want to know about them. I have not been able to find a manual for it but have had it stripped down completely. It seems to suffer from some serious design faults, which I have modified some of them and it is working fine at the moment. Unfortunately, I did not photograph any of the mechanism before I stripped it. I will detail the problems, then my modifications for it. 1/. The rise and fall mechanism was bent as follows:
2/. The winding handle worn on the inner surface of the handle
3/. The handle inner surface wears the front surface of the tilt panel
4/. The 10mm threaded rod that fits into the handle was bent
5/. A 2.5mm thickness boomerang shaped piece of panel steel raises the motor mounting also bent.
6/. Motor Mount panel bent/distorted.

If you still require the info I can detail the repairs and mods.

cheers

 

[user 19915]

Anyone know if this member is still on the forum kiwi1

Mod Edit:- The forum has a members listing which includes a search facility.
kiwi1 has not logged into the forum since 03 Mar 2011, 13:40 the date of the post you quoted.

 

[user 19915]

Thank,s