i bought this extension lead with a foot pedal which i am going to use on my scheppach deco 402 but to make it work i need to change the nvr switch to an ordinary on-off switch so when i change the blade or rethread the blade through a job i can switch the saw off by means of the foot switch and the on-off switch for safety then when done flick switch to on and step on footswitch
as anybody out there done this as there are 4 wires coming to the nvr switch from the mains there is a blue,brown, connected to the switch and an earth that goes up in to the machine somewere and then there is a white, coming from what must be the variable control switch and a black from somewere in the machine coming in to the switch what combination of wires go where to connect an on-off switch?
as anybody out there done this as there are 4 wires coming to the nvr switch from the mains there is a blue,brown, connected to the switch and an earth that goes up in to the machine somewere and then there is a white, coming from what must be the variable control switch and a black from somewere in the machine coming in to the switch what combination of wires go where to connect an on-off switch?
