Delta Wood Lathe 46-255 Help

[pmitch53]

Hi i have just bought an other lathe its a Delta Wood Lathe 46-255 can any one tell me what size thread has it has so i can bye for a chuck for it and what live center does it take please
Thank you
Pete

 

[blackrodd]

Until someone else comes along, I could only find a 46- 250 model, not a 255, perhaps it's a later model.
So not able to help with you're thread size
Here's a link for parts diagram for the 46-250, should you not have one, for the 255 and they are similar.
Regards Rodders

http://www.mikestools.com/download/Delt ... e-WL11.pdf

 

[chrisfarrow]

I suspect it's essentially the same as this http://www.fox-machines.com/en/fox-mach ... f=48&p=233

I'm sure if you give them a call they can confirm either way.

 

[Hobbyshop]

Spindle thread size is 1" x 8tpi.
It is the same machine as the Axminster AWVSL900, and the Jet JWL-1236 (and probably the fox machine mentioned above).
Downloadable manuals are not difficult to find for the Axminster and Jet lathes.

I have purchased replacement pulleys from axminster based on their AWVSL900 and they are identical.

Regards
Kevin

 

[Dave Brookes]

Try this link
http://cdn.timurkaripov.netdna-cdn.com/ ... +255+lathe

Dave

 

[pmitch53]

Thank you all for your help i should be able to get something from those links and measurements
Thanks again
Pete

 

[lurker]

I have this lathe
1"x8 tpi
M2

Pm me if you want a scan of the manual

 

[Chippymint]

Hi

I'm new to this forum so sorry if I have made and error.

I have just obtained the above lathe without a manual. I note you have one and was wondering if you let me have a copy please?

Please let me know.

all the best

Steve

 

[lurker]

Pm me with a e mail address and I will send you a scan.
You will be a bit disappointed though.

I mean with the manual
The lathe has been fine, have had it from new 12 years ago and it's in regular use