Curved Island Unit

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

pablo823

Established Member
Joined
20 Jun 2009
Messages
46
Reaction score
0
Location
Wakefield, West Yorkshire
This is curved barrel shaped unit I made as part of a kitchen a couple of years ago . It was something I hadn't done before
so I quite liked the challenge. I've shown it before on uk woodwork but I thought as I've only just joined this forum
there might be a few people on here who might like to see how it was done including the completed kitchen. Thanks
for looking

Paul

Laminating Curved door sections 2mm Tulip wood
IMAG0458.jpg


Side sections done in bendi mdf with a 4mm tulip veneer on the face
IMAG0471.jpg

IMAG0470.jpg


Doweled and ready to glue
IMAG0473.jpg


Glueing up, used Tregarne wood welder to set glue
IMAG0474.jpg

IMAG0475.jpg


Made cutters for curved door sections
IMAG0481.jpg


Used template to rout 12mm groove for panels
IMAG0482.jpg


IMAG0483.jpg


IMAG0484.jpg


Styles grooved and doweled
IMAG0487.jpg


Forming the curved skirting
IMAG0478.jpg


Mid rail and chopping board holes chopped out
IMAG0485.jpg


Primed Ready to fit
IMAG0546-1.jpg


Butchers block oak top
IMAG0548-1.jpg


Initial Design for Kitchen
wigglesworth.jpg


Actual Kitchen Finished
IMG_5728.jpg


IMG_5732.jpg


IMG_5722.jpg


IMG_5705.jpg


IMG_5703.jpg
 
This is awesome, great to see the WIP pics.

How long did this complete kitchen take you?

Love to hear a bit more.
 
the_g_ster":wkf0nxp1 said:
This is awesome, great to see the WIP pics.
How long did this complete kitchen take you?

Love to hear a bit more.

Glad you like, It took 2 1/2 weeks for the curved unit and I think it was 7 for the rest
Paul
 

Latest posts

Back
Top