jorgoz
Established Member
I'm in the progress of working on a book-shelf/display stand and have run into a problem. There's too much room between the shelves making it look too tall. Frames are 1200mm high and 400mm wide, shelves are 1200 x 352.
How to solve this ? Add another shelf or lower the frames.
Adding a shelf, but how to make i look good, frames are glued ?
Lowering the frames, would be a last resort. I've bookmatched the legs and used blind dovetails, would hate to start over with a half assembled/glued frame.
The bottom shelf will be attached with 3 mm thick brass stretcher plates. The shelves will be tapered along their height to where they meet the frame
How to solve this ? Add another shelf or lower the frames.
Adding a shelf, but how to make i look good, frames are glued ?
Lowering the frames, would be a last resort. I've bookmatched the legs and used blind dovetails, would hate to start over with a half assembled/glued frame.
The bottom shelf will be attached with 3 mm thick brass stretcher plates. The shelves will be tapered along their height to where they meet the frame
![5736601513_b6152ebb00_z.jpg](https://proxy.imagearchive.com/1be/1beeb6d7fcd46a47dbd99c16f9d7bf57.jpg)
![5736601525_986bb1c50e_z.jpg](https://proxy.imagearchive.com/7f3/7f3d123713ab46128423dea0a6a15ce3.jpg)