Bedsprings ! ...or similar to fix a big vise?

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
If you want to use the vice as a non-QR -- wedge the half nut securely against the thread and off you go.
 
Can you not buy some piano wire of the correct diameter and wind your own spring

I'll probably have a go - though it would be much easier if I had a lathe to do it with.

I might have a go by hand, but the gauge is pretty thick and I'm not sure I have the tools to be able to dothe tight bends at the ends where it needs to be shaped to fit the retaining lugs. We'll see.
 

Latest posts

Back
Top