Quantcast

Bandsaw Problems

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

murphs14

Established Member
Joined
26 Oct 2011
Messages
27
Reaction score
0
Location
london
Hi everybody,
I have a problem with a Sheppach bandsaw. Even with the head wound down to about 2 inches above the table whenever I put a piece of timber through it and I am only talking about soft battening the cut veers toward the fence on the left hand side. It is impossible to get a straight cut. I have adjusted the (not sure what they are called) stops both above and below the table so the blade just runs through without snagging but it is still the same. Help please. Anybody experienced the same.

Thanks
Peter
 

hamburglar

Established Member
Joined
26 Dec 2007
Messages
60
Reaction score
0
Location
Leeds
Second the new blade option.

Set the drift on the new blade when you first use it for really accurate cuts.

Hamburglar
 

murphs14

Established Member
Joined
26 Oct 2011
Messages
27
Reaction score
0
Location
london
Thanks everybody.
I have contacted Tuffsaws. Heres hoping a new blade sorts the probs. thanks again
peter
 

Latest posts

Top