Advice please on dust extraction

[PolyHive]

I have invested in a Charnwood 619 table saw and now need a dust/chip extractor. Charnwood sell one which can be wall mounted with is tempting but would it be a sensible buy?

My budget is £200 tops.

Pete

 

[Joshjosh]

Hi
I have an old charnwood extractor that works well for me it's 2hp any less hp and it would struggle for me

 

[sunnybob]

Give us a link to the product so we can advise on its use.

 

[user22161]

I assume the OP has seen the W685

https://www.charnwood.net/products/prod ... athway-109

I had one and it worked on a single machine but, at 1 HP, only with a short hose. Later changed to the much larger 2 HP W691, which is far better and works OK on 5m hose.

Charnwood stuff by the way is often cheaper if bought from Poolwood.

 

[sunnybob]

Poolwood were very cheap on price when I was looking for my bandsaw, but their shipping actually doubled the cost.
Something to be aware of.

 

[PolyHive]

I have seen the 685 yes and noted its one horse power. A lot of my work will be with insulation type material so not heavy chips.

It's also tempting from the point that it can be wall mounted.

Pete