30 Degree Router Cutter?

[HardTarget]

Would any one know where I can purchase a 30 degree router cutter (with bearing guide) that will cut at least 3/4" ? I have tried looking through the Trend catalogue and there seems to be a few cutters, but none with a 3/4" + cut depth.

 

[Mike Wingate]

http://www.mlcswoodworking.com/shopsite ... chamf.html
I buy quite a few cutters and tools from this company. Quick delivery to the U.K. Quality and service at a fair price.

 

[Chems]

This one any good?

http://www.mtmc.co.uk/product.aspx?Prod ... googlebase

 

[goldeneyedmonkey]

Give Wealden a try.

Cheers _Dan.

 

[HardTarget]

Thanks for the links, looks like this might be the one

http://www.mtmc.co.uk/Routing-/Router-C ... 37946.aspx

 

[Chems]

Shames its a Festool one, good router cutters are expensive anyway without festool sticking there markup on as well!

 

[RogerP]

Thanks for the links, looks like this might be the one

http://www.mtmc.co.uk/Routing-/Router-C ... 37946.aspx

If you have 12mm colett for your router.

 

[HardTarget]

Thanks for the links, looks like this might be the one

http://www.mtmc.co.uk/Routing-/Router-C ... 37946.aspx

If you have 12mm colett for your router.

Sigh! Didn't see that, take it that it won't fit a 1/2" Elu 177E router then? If not can I buy a 12mm colet?

 

[RogerP]

Thanks for the links, looks like this might be the one

http://www.mtmc.co.uk/Routing-/Router-C ... 37946.aspx

If you have 12mm colett for your router.

Sigh! Didn't see that, take it that it won't fit a 1/2" Elu 177E router then? If not can I buy a 12mm colet?

Sorry, not having an Elu, I don't know off hand. If you can't then get the one from US - It's a lot cheaper anyway.

 

[goldeneyedmonkey]

Is the last one down on this page @ wealden's any good?

Cheers _Dan.