1mm kerf circular sawblade?

[Guitarrero]

Hi,
Does anyone know where I can get (or have made/ground) a circular saw blade to cut a 1mm kerf?
It will only get light use cutting to a depth of 10mm max, so could be rim-ground, and need only be approx 6" diameter with a 5/8' hole for use on a Startrite tilt-arbor table saw.

Any help would be much appreciated

Thanks, Steve

 

[marcros]

You may be able to get a slitting blade that size. I think that I saw some on Scott and Sargent.

 

[Mike.S]

May be worth searching for 'slitting saws'. For example, Addison make 125mm diameter, 1mm kerf blades, but with 22m bore. They may make other sizes but I only had a cursory look when searching for saw blades to cut teh slot in saw handles. Link here.

 

[Guitarrero]

Thanks both ... I'll have a look for slitting blades.
I would like to find the correct bore as I have found that adapter 'washers' are invariably too thick for thin kerf blades and cause problems when mounting the blade on the arbor.

Thanks,
Steve

 

[Peter Sefton]

I would ask these guys, http://www.atkinson-walker-saws.co.uk

Cheers Peter