Gents I believe Richard Fairbrother of RF toolshop is vey ill so I think that is why nothing happened Craftsmans gallery will supply and ship to the uk on very reasable rate in the meantime
David
I need to make two exterior doors and have been reccommended to use American White Oak can anybody advise me the best place to purchase from
Ideally a timber importer so I can finish to 50mm thick My area is Surrey Sussex and Hampshire
many Thanks for your help
DavidN
Gents
Thank you for all the advice on the reg etc but I still need the advice on
how to make them...can anyone help
when I have made them I will worry about the regs
Help Please
DavidN
I have to make a Lot of windows for my son,s house..opening and fixed.
Can anybody recomend where I can get any manufacturing advice-
plans or book I am not sure on how to do the cross pieces etc
any help would be appreciated
Regards
David N :?:
On my Dewalt DW733 planner thicknesser when I have set the blades as per instruction with a setting stick 3-4 mm movement
After a couple of planing on oak I test the blade setting again and it has moved...This has only started recently the machine is around 6 years old
The pinch bolts are as...
I have had the Scheppac planner thichnesser for over two years
I have it mounted on a wheel base two wheels at the front and one at the back..the machine just stands in the frame work moving round the shop it easy with care ,,once its in position and dropped no problems
on any size of wood
If...
Gents
Many thanks for you input we will try each one and hope
for good results
Will post how we got on , will start on boat in two weeks time
Its too B&8*() cold at the moment
Many Thanks
David Nevin
I am at present helping a friend to oak panel a 60ft narrow boat in oak
we have had a problem on leakage on to the oak window surrounds I have made also onto the oak faced plywood we have panelled to the walls
I think the oak faced plywood will have to be replaced BUT
Does anybody have any...
In one of my woodworking mags I noticed an extension collet that
used an allen key to lock the router bit in
I cannot find that mag again does anybody know the supplier and has any comments on the collect extension
Many thanks
DavidN
Gentlemen thank you for all your advise
I glued 21max260mmx860mm pieces successfully
using two methods
1st....sanded both edges with 120 grit sandpaper use meths to clean both surfaces the using biscuits and Tilbond II glue it worked very well
2nd method I did not use the meths as using...
I have to glue up some Teak which is very oily is it advisable to
wipe the surface to remove the oil before its glued and if so
what do I use
Advise would be appreciated
Regards
David Nevin
Thank you for your input Colin
I look at the jig as a general jig for dovetails But have just found out
it is not sold over here anymore you have to get from the supplier in australia.
I will use the bog standard dovetail jig that on the market
But many thanks for your input
Regards
David N
Has anybody purchased the Gifkins Dovetail jig and is it worth the money
Any comments would be appreciated as I am considering raiding my
grandchildrens piggy bank to buy one
Thanks
DavidN