Search results

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. M

    Craft fair article

    just have a go.... my first craft fair was I took a paste table to my local market and a nice table cloth put some scrap wooden blocks under my items arrange into a bit of display with some prices on and I sold a good amount of stuff. if people like what you do and price is reasonable there is...
  2. M

    Hegner arrived today - Not so happy - Update, Now very happy

    where you had it connected before is if you want to connect to a dust extractor , you simply connect the hose into the large port and then the dust will be taken away from the top and bottom of the table simple , I have the record mid range dust extractor with power tool hose and connectors the...
  3. M

    step by step guide

    + 1 yes please ! if you want to stop a grown man crying and putting a sledge hammer through his laptop then do it ! :lol: :lol: :lol: :lol:
  4. M

    second hand hegner buyers beware !!

    am I right in assuming that you have just paid 400 for a axminster one ?? you could have got a single speed hegner one for 400 I have that model and make and sell craft work have done for three years with the right blade selection you don't always need variable speed unless doing metal or...
  5. M

    A few name plaques..

    I would like to do more name plaques have done a few using steve goods font software I would like to use this type of soft ware but I bit thick when it comes to using it and I end up nearly throwing the laptop through the window I will have to come over to your gaffe steve as I not far away...
  6. M

    New saw arrives tomorrow.

    plus one for how you get on especially with blade changing etc , we need more people to give reviews of different machines and pictures as I am sure there is plenty of people on this forum who do decent work on other machines than a orange one 8) I have the orange one basic model I keep...
  7. M

    second hand hegner buyers beware !!

    it is an old one so its before 1995 , people are very coy about saying how old it is or showing a picture with the date plaque he states multicut 2 but the throat size is only I think 14 inch same as a new m1 it has no quick release so you will have to do more winding on the tension screw but...
  8. M

    40mm forstner bit

    ok thanks guys , steve what size did you get ? weren't sure if 40mm would be enough clearance for tea to get in and out and can you provide link if possible as I cant see it on ax site is it the same as spindle has put the link to ? thanks a lot mark
  9. M

    40mm forstner bit

    thanks spindle yeah it is a bit I don't mind going to 30 , I seen some on ebay coated cheap not saw toothed for a few bucks but I guess the coating is not really any benefit I found some at reasonable price on ebay sawtoothed for 16 pound but the length to long at 150 mm as I doing some end...
  10. M

    40mm forstner bit

    some links to anywhere anyone has where you got any bits or makes would be handy unless they are g14 classified 8) 8)
  11. M

    40mm forstner bit

    I know Geoff I have made quite a few before couple of years back with glass holder I want to make some with just the tealight in so I only need advice on what quality bits there are. my drill press is only standard but does the job fine thanks mark
  12. M

    40mm forstner bit

    both :D :D
  13. M

    blade storage

    ok guys thanks for advice and tips , I think for now I going to see if I can make something without spending any money :) I have some 40mm thick pine bits left so my idea is I going to glue sandwich three pieces togetherso to make a depth of 120mm and make it fairly wide and drill a series...
  14. M

    40mm forstner bit

    I am looking for a 40mm bit as my wholesale customer wants me to cut some tea light candle holder blanks and I want to use it for myself for my own holders stevebuk when I was searching I came across a thread by you on here and you said you were going with colt but I cant see them on ax site...
  15. M

    blade storage

    thanks for your replys and photos , yeah your type will do me martin I got some bits of wood knocking around and j mac the test tubes are the cheapest I have seen only comes too 3 quid for 8 including postage martin what diameter did you drill hole ? looks like I may have to get a drill bit...
  16. M

    blade storage

    hi I am ordering some more blades from mikes and decided it is time got round to having some proper blade storage even though I been making and selling items for a few years I just still have packets lying around I seen a few ideas but wondered if we could have a fashion parade of your ideas...
  17. M

    Pencil bench

    looks nice I like it what diameter hole is it and what thickness birch ply 6mm ? mark
  18. M

    a bag full of plaques

    that's ok boys keep the jokes coming , I will sit back here while I am reading them counting the bundle of money I got for making them. :occasion5: \:D/ steve I have made lots of money from planks , lovely jubbly :lol: :lol: :lol: I let other people do the hard work of decorating my...
  19. M

    a bag full of plaques

    hey its a strip of wood with holes in it get it right son decorative and informative ? ooooh get you martin have you by any chance swallowed a hegner :mrgreen:
  20. M

    a bag full of plaques

    can you not see the plaque lifted up at an angle and a hole in the end ? if not spec savers is open to 530 :lol:
Back
Top