Arnold9801
Established Member
Can anyone offer me some advice on a good Insurance company for insuring workshops and tools please?
Arnold9801
Arnold9801
Workshop/tool insurance
- Thread starter Arnold9801
- Start date
Help Support UKworkshop.co.uk:
Cabinetman
Established Member
My experience is that it’s expensive, building and contents £1600 and if you don’t have everything as specified like five yearly electrical inspection, the right type of locks on the doors etc, they are not very inclined to pay out in the event of a claim.
Personally I would spend the money on a good alarm system ( including a master blaster that makes it debilitating to be in the building ) that connects to a local central station who will come out in the event of an activation. Also make the place impregnable as much as you possibly can. It is extremely unlikely that they will be equipped with a lorry to take away your big bits of cast-iron, much more likely to be interested in power tools and handtools so lock these away every night in a very secure tool cupboard, they will not want to hang around trapped inside a building trying to get inside that cupboard, particularly whilst the alarm is going off and the master blaster is making it difficult to think. Ian
Edit also lock away your ear defenders.
Personally I would spend the money on a good alarm system ( including a master blaster that makes it debilitating to be in the building ) that connects to a local central station who will come out in the event of an activation. Also make the place impregnable as much as you possibly can. It is extremely unlikely that they will be equipped with a lorry to take away your big bits of cast-iron, much more likely to be interested in power tools and handtools so lock these away every night in a very secure tool cupboard, they will not want to hang around trapped inside a building trying to get inside that cupboard, particularly whilst the alarm is going off and the master blaster is making it difficult to think. Ian
Edit also lock away your ear defenders.
MarkAW
Established Member
Haha
Crowbars, hammers and bolt cutters too
Blackswanwood
Still Learning
I would suggest using a Chartered Insurance Broker who will be able to advise which insurance company is best for your individual circumstances. Two insurance companies with sound reputations (imho based on umpteen years in insurance and financial services) for small business insurance are NFU Mutual and Hiscox. But there are others and comparing them properly is an arduous task and one of the benefits of using a broker is that they do this for you.
Mrs C
Established Member
Not sure if it is home or business. NFU (used to? - this needs checking) cover tools in house contents insurance also including outbuildings.
Another vote for NFU - they are more expensive, but easy to deal with and pay out when needed.
Another vote for NFU - they are more expensive, but easy to deal with and pay out when needed.
andy hamilton
Established Member
I've been using simplybusiness.co.uk for years for my business insurance. It's a tradesperson's combined policy covering public liability, tools, machinery and workshop insurance. They're easy to deal with on the phone or online. I forget how much I paid to renew this year, but it was well under £200. I don't know if they can find a policy without the public liability for non-tradespeople, if that's all you need you'd probably do better to add it to buildings & contents insurance. It's likely to increase the cost, but probably not by much
ade_tumu
Established Member
We've been using Town & Country insurance brokers for many years: www.insurance-policies.co.uk. Insurance via them is around £150 for our workshop contents.
Cabinetman
Established Member
Yes I would recommend the NFU unfortunately they wouldn’t cover my workshop as it’s in a flood risk area, it’s never flooded in the 160 years since we built it. And as was mentioned I’m fairly sure my tools at home are covered on my NFU home policy. Ian
MarkAW
Established Member
How old are you!?
Cabinetman
Established Member
Hi Mark, it was a royal we, ha ha. Great ( or great great) granddad built it in 1860 – me I’m 65. Ian
TheTiddles
Established Member
If it’s your house then just make sure what’s on your policy and include the value. I always pose the question “so if I put all my belongings in the garage and they were stolen, it would be covered right?”, if the answer’s “only up to £500” or similar, use another provider
business will be different
business will be different
Arnold9801
Established Member
Thank you all for your replies. I will make contact with NFU and the others you’ve mentioned.
I’m not in business but will see if I can get cover.
Happy Christmas everyone and stay safe and hope we can all have a better 2021!
Arnold9801
I’m not in business but will see if I can get cover.
Happy Christmas everyone and stay safe and hope we can all have a better 2021!
Arnold9801
I couldn’t find anybody who would cover mine for a reasonable price (timber frame, close to a river etc.) other than Blackfriars Insurance Brokers - Chartered Insurance Brokers in the UK
Ollie78
Established Member
Insurance for tools and workshops is a horrible nightmare.
I have a combined policy through dpi. With Zurich.
They will only cover minimal amount of "hand tools" or "portable power tools" which is anything one man can lift basically. Stuff only covered in the van during daytime hours. They are happier with "plant" or fixed machinery in the workshop.
I have to add several caveats to my policy because of the building and stuff as well.
The van insurance is completely inadequate for tools, even a tools only policy will only cover a small amount.
My broker told me that joinery is basically becoming uninsurable, and I am quite lucky to be able to get any coverage at all.
I said I was willing to pay if he could actually find me proper coverage for everything. He could only do it through an indemnity policy at insane expense.
If someone could specialise in insuring joiners and carpenters they could get all the trade.
Ollie
I have a combined policy through dpi. With Zurich.
They will only cover minimal amount of "hand tools" or "portable power tools" which is anything one man can lift basically. Stuff only covered in the van during daytime hours. They are happier with "plant" or fixed machinery in the workshop.
I have to add several caveats to my policy because of the building and stuff as well.
The van insurance is completely inadequate for tools, even a tools only policy will only cover a small amount.
My broker told me that joinery is basically becoming uninsurable, and I am quite lucky to be able to get any coverage at all.
I said I was willing to pay if he could actually find me proper coverage for everything. He could only do it through an indemnity policy at insane expense.
If someone could specialise in insuring joiners and carpenters they could get all the trade.
Ollie
