Help Support UKworkshop.co.uk:
-
-
HHousey210 replied to the thread Clark single phase motor wiring.The red knob on the black pressure unit is a pull up, on off switch. I trust that is on.
-
HHousey210 replied to the thread Thoughts on electric vehicles?.Check with your insurance company first. Electric cars, no-one ever gives a clear answer to the ownership of the battery or if indeed it...
-
HHousey210 replied to the thread Clark single phase motor wiring.as others, did it ever work! Check the fuse and pressure switch?
-
HHousey210 replied to the thread Fire door regs?.An architectural supplier should stock sheet intumescent. Usually 300mm sq, easy to cut to hinge leaf and behind both that of frame and...
-
HHousey210 replied to the thread Where do they get it?.The beauty of Douglas Fir. Nice but a good mask is a must when maching, for me on a par to Iroko as to hitting the nasal system!
-
HHousey210 replied to the thread Should I cut my arbor to be able to bore deeper?.or a bigger lathe!
-
HHousey210 replied to the thread Should I cut my arbor to be able to bore deeper?.How will shortening the morse taper help? The black mar near the chuck will not change! Leave it be. Look at smaller chucks and tapers.
-
HHousey210 replied to the thread Belt and Disc Sander : Latest distraction.Looks like Nutool, circa mid 80s
-
HHousey210 replied to the thread CCTV, workshop security.Awaiting delivery of a dedicated psu, fan cooled with variable 2v voltage increase, so I just hope that solves the issue. If not, then...
-
HHousey210 replied to the thread CCTV, workshop security.Update Voltage readings at camera. 18mtr factory terminated lead - daytime reading 11.68v. Night time reading with leds on 10.49v- 1amp.
-
HHousey210 replied to the thread Moisture-proof cabinet.plastic will sweat. Source those moisture absorbing crystals.
-
HHousey210 replied to the thread Sedgwick 571 vs Multico M.Of all the morticers I used over my working life it was the single wheel dual action I hated. keep to the twin wheel, back and forward...
-
HHousey210 replied to the thread Door dipping gone wrong (maybe?).I always use oil paint. Only one primer for me, Dulux aliminium wood primer.
-
Loading…
-
Loading…
