Triton TRB-001 Router Plate Screws

[tisdai]

Hi All

I am trying to find out the correct screw size's to buy for my Triton TRB-001 Router which i am going to be fixing to an aluminium plate to go into a table, If anyone on the forum owns one I would be verrrrrrry gratefull if you could let me know the size please , as I have gone through these posts and others so far and some say 1/2" and some say 3/4" long.

Plus they are that old most of the links are dead now.

https://www.ukworkshop.co.uk/forums/viewtopic.php?t=20680&highlight=triton+screws

https://www.ukworkshop.co.uk/forums/viewtopic.php?t=20464&highlight=triton+screws

https://www.ukworkshop.co.uk/forums/viewtopic.php?t=8966&highlight=triton+screws

Cheers

Dave

 

[Dodge]

Dave,

Here is the parts diagram for the router - Hopefully this should help you

http://www.tritontools.uk.com/TRB001spares.html

Edited - the link below shows them available at 66p each - Part No TRA118

http://www.toolsparesonline.com/search. ... rms=TRA118

Hope this helps

Rog

 

[tisdai]

Hi Rog

Thanks for that m8 appreciate it, but to screw it to the aluminum plate that i have bought I have been told that they will need to be longer :? I am not sure if that is right or if it is wrong thats why i asked on here, I will order the 1's you linked me too though m8 as i may need them in the future.

Cheers

Dave

 

[knappers]

I am using screws that came with my triton router, and they are plenty long enough with my 9mm thick Incra plate.
Si.

 

[tisdai]

Thanks for that Si, I am going to order the 1's that Rog linked me too so they should do the trick then.

Cheers guys appreciate your help

Dave

 

[johnf]

You need 1/4" UNC
http://cgi.ebay.co.uk/1-4-x-1-UNC-Stain ... 53e642bd31

These are stainless but they will do the job

 

[tisdai]

You need 1/4" UNC
http://cgi.ebay.co.uk/1-4-x-1-UNC-Stain ... 53e642bd31

These are stainless but they will do the job

Spot on thanks for that John, A few other things i need i can get from their as well

Cheers

Dave