threaded rod with hex inset

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
13 Jul 2015
Messages
2,924
Reaction score
148
Location
Wales
Picture a threaded rod, where one end has a hexagonal "hole" in it for an allan key to tighten. Does anyone know what these are called or where I can find them? I had a few but have run out and no idea where they came from.

They're common sizes, M6/M8/M10 etc and come in various lengths.

I can get away with just using normal thread rod and two nuts to effectively do the same thing, but if the above are cheap, I'd rather those.

(Note : The entire length is threaded, not half threaded and half a screw)
 
Back
Top