bodgermatic
Established Member
So I've charged ahead and built myself into a corner, so to speak I've constructed the cupboards below from 18mm MR MDF, supported by 40mm framing. I wasn't particularly confident about building the face frame and then offering it up, so I built it as I went along, screwing it to the framing from the face (hence the filler). The good news is that everything is square and level, the bad news is that I've realised that I don't really have a plan for supporting the shelves that go in the left hand cupboard. I get the creeping feeling that I should have planned for this, and that I've made life more difficult for myself. The shelf span is 650mm and the shelves are 18mm MDF as well. I've seen these at Screwfix, but they look a bit weedy, and they'd require me to drill 3 (5?) holes level around the inside of the cupboards.