Small Wishing Well Project

[Dog]

Here's my small wishing well project that I designed and built from various pallet timber and four spare slates. It's approx; 4' high x 18" wide. Finished with solvent based light brown wood preserver.

Dog.

 

[PeteG]

Hello Dog...I dismantled a few pallets in work last month. Haven't done anything with them yet, but as they were
fairly new, thought the timber would come in handy. Our lass wants a Cold Frame making at some point, so it
could be a pallet project. How did you join the sides of the base together?

 

[Dog]

Hello Pete, I made an internal hex frame top and bottom joined together with glue and screws, screws were counter sunk below surface, then fixed the sides with nails and glue to the frames, first attempt but as with all designs things change and other easier ways might come to mind in the future. I used an old broom handle for the handle and it turns too.

 

[PeteG]

Thanks Dog, and apologies for the late reply.

 

[Dog]

Not a problem Pete. Look forward to seeing what you've made from pallet timber, post some pics!