My machine ain't fixed !!!
A bit of a moan first; Having checked the website, telephoned SIP and then World of Power who they directed me to, I got all the answers I needed.
1). Are those 2 parts the only ones I need - Yes
2). Are they definitely in stock as I need very urgently - Yes, order via website which gets priority and will be sent straight out (web says dispatch within 24 hours of order).
All good so ordered at 10.15 Thursday, chased Saturday only to get a reply that parts were in stock but at SIP central warehouse and had to get to *** first.
A few more emails and I got the parts Tuesday. So somewhat misleading ! Very good attitude from *** staff though so no complaints about that.
It's a bu**er to get at but installed the new parts, seemed a bit sloppy but turned ok until I fitted the motor and as soon as under load the damn thing slipped as badly as the original and won't raise the sawblade mechanism..
Took it all out again, measured the wheel and the new one is 1.7mm smaller, not much but enough to cause a problem and no way to adjust the assembly.
Additionally, the height adjusting worm rod is a different shape and the original hand wheel won't fit!
More emails with photos and phone calls to SIP technical, who were very helpful tbh and though he searched and found an original rod and handle now no good to me, the worm wheel is unavailable. My only option it seems is to strip down the whole machine and elongate / shim the existing holes in the cast iron support to get some adjustment. Should work but a PITA job.
Great saw but unless I received an undersized wheel it's potentially an issue for anyone with a 01332 saw that was made prior to 2006.
To say I'm a bit p****d off is an understatement.
Bob
