Scribing Conundrum

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

SteveF

Established Member
Joined
16 Sep 2013
Messages
2,230
Reaction score
1
Location
Maidstone
I have a sloping ceiling in Kitchen
20mm difference height over 2.5m
I am building a face frame kitchen
the face frame only needs to be 20mm in most places, the odd extra against walls etc (maybe an additional 5mm)
how do you approach the ceiling slope?
I am sure this is logical I just cannot get my head around it
was bad enough leveling cabinets with a 15mm slope on floor

Steve
 
hi Bob

thanks for quick response
no plans for a cornice, but could incorporate if would help the situation...I can see your point of hiding with a "shadow"
I am sure looking at the quality of your work that you have to deal with this on a regular basis
why cant walls and ceilings be straight ffs
Steve
 
If you do a big face frame at the top say 60-70mm, and pin the cornice on the front showing maybe 40-50mm of face frame you can run the cornice off slightly to take up maybe 10mm.

If it was me I'd just keep the units down and infill to the ceiling.
 
Back
Top