Router Table & Base

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

PeteG

Established Member
Joined
9 Jun 2013
Messages
998
Reaction score
2
Location
Manchester
I should have made my own really, but I bought the Axminster benchtop router table before making the TS station. After that was finished I really regretted not making my own router table.
Still, it needed a base so I made one, and painted it :D As you can see, it has two good sized drawers, four braked 75 mm castoring wheels for tight manouvering around the workshop, and
the Power Tool NVR switch also from Axminster. Haven't fitted a router yet, I have a Trend T5 but ideally I would love to pop a 1/2 inch router in there.

 
I have quite extensive colour blindness. When I see a colour combination like that I often wonder if it looks as bad to others as it does to me? Nice job though (no offence intended BTW)

Edit: Looking at the NVR perhaps this was the inspiration :p
 
Back
Top