C Chris72 Established Member Joined 29 Jun 2005 Messages 78 Reaction score 0 30 Jun 2005 #1 Anybody got any advice on what sort of resin I can use to fill knot holes in oak? Cheers Chris
P Philly Established Member Joined 24 Nov 2003 Messages 6,874 Reaction score 1 Location Dorset, England. 30 Jun 2005 #2 Hi Chris How about using some epoxy mixed with oak sawdust?? Make sure you remove most of the excess soon after it cures as it gets pretty darn hard later! Hope this helps Philly
Hi Chris How about using some epoxy mixed with oak sawdust?? Make sure you remove most of the excess soon after it cures as it gets pretty darn hard later! Hope this helps Philly
C Chris72 Established Member Joined 29 Jun 2005 Messages 78 Reaction score 0 30 Jun 2005 #3 Thanks.What sort of epoxy are we talking here? Chris
jasonB Established Member Joined 26 Nov 2004 Messages 5,044 Reaction score 3 Location Surrey 30 Jun 2005 #4 Why not use one of the two part wood fillers, they are a bit like car body filler but a lot easier to sand. Jason
Why not use one of the two part wood fillers, they are a bit like car body filler but a lot easier to sand. Jason
P Philly Established Member Joined 24 Nov 2003 Messages 6,874 Reaction score 1 Location Dorset, England. 30 Jun 2005 #5 Chris Just regular 2-part epoxy. Philly