Pipe Clamps.

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

JoinerJim

New member
Joined
3 Jul 2012
Messages
1
Reaction score
0
Location
Gloucester
Anyone know where you can get a long reach (5") Pipe clamp this side of the big pond and whether they will work on an aluminum rod of roughly the correct size, I am wanting to build a morticing jig?
 
Not seen 5" reach ones, I've got the long reach #56 Ponys but they are only 2.5" reach.

You will soon chew up the aluminium rod as the locking plates will dig into the metal. Also you will have to turn the rods to size as teh OD of 3/4" pipe is not a stock size.

J
 
Back
Top