Panelling box section

[GrahamIreland]

Hi, I started building a side locker from box section and want to panel the sides.
Does anyone know a good means of attaching wood?

Clips of some kind or a simple techniqe?
Graham

 

[marcros]

tek screws?

 

[sunnybob]

plywood, fixed with these
https://www.bossard.com/-/media/bossard ... ews_en.pdf

with these under the screws
http://www.a1metallics.com/product/Bras ... shers.html

not only looks good, but the screw heads act as good sliding points if you want to drag the box about.

 

[GrahamIreland]

It's more a question of where to screw in,
I'd like the panelling to luy flush with outside edge.

The panelling is thin and each section has a panel.

 

[nev]

If you don't want screws showing on the outside, glue some batten on the inside of your panel next to the frame and screw through that into the frame.

 

[TFrench]

If you've fabbed that yourself just weld a bit of flat bar on the internal edges to screw to?

 

[-Matt-]

That ^

Was going to suggest triangles in the corners but either/or.