Japanese Box

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

woodbloke52

Established Member
Joined
13 Aug 2024
Messages
32
Reaction score
86
Location
Salisbury
Can't remember (it's an age thing) if I've posted this before, but apologies if you've seen it before. This is a Japanese style box based on a design by Suda Kenji, the original of which can be seen in the Japanese gallery at the BM.

IMG_3281.jpeg


Bog Oak veneers over a 'shop made pine core, satinwood end panels. Bog Oak plinth, satinwood splines.

IMG_3285.jpeg


Four drawers, maple fronts, African Blackwood 'capstan' pulls and wedge for the hasp.

IMG_3287.jpeg


IMG_3286.jpeg


Drawer sides in some Victorian mahogany, circa 1860 kindly donated to the cause by 'Cabinetman'. The drawers run on a central runner so don't make contact with the sides of the box.

IMG_3284.jpeg


Hinges from CHT are surface mounted which gives extra clearance when the box is opened. Finished with severial coats of wiping varnish (not my favourite so it's being kicked into touch) with wax over the top. There were a number of 'issues' with this project which means that I was going to sell it on FB but SWIMBO, in her wisdom, purloined it and it now contains some of her treasures.

IMG_3576.jpeg


Doesn't look too shabby after all so I'm glad now that I didn't flog it - Rob
 
I’m not surprised she wanted it! It is lovely. Would be perfect for so many things.
 
I'm fascinated what the issues were with this lovely box. And how was the central runner carried out.
It was one of those projects where there were a succession of irritating little problems that took no end of time to correct, so it never seemed to go 'right' and towards the end I was getting a bit hacked off with it. However, once I saw it coming together it began to look respectable...

Making drawers with a central runner is convoluted and a lot more difficult than a conventional one, but sometimes it's the only and best way of making one. F'rinstance, on my Krenov interpretation of 'Britta's Cabinet':

IMG_1039.jpeg


...there's only one way it can be made as there's a 30mm gap each side.

IMG_1046.jpeg


...and that's with a wide central runner, in this case in Paduk, with double drawer bottoms in the same. It was Rob Ingham who first put me onto these in his now out of print, though excellent book, 'Cutting Edge Cabinetmaking' - Rob
 
Back
Top