Templatetom
Established Member
Producing jigs has always been my method of producing a number of projects with Greater Safety Awarenss.Lately I have been working on a Jig that is capable of producing a number of wood working Joints. All material from off-cuts around the workshop. I have managed to produce a number of the joints and I will be launching the jig at our local wood show here in Sept. (Perth Western Australia). All the processes have been completed with the router in the plunge mode. This week I have added another joint to the collection and that is the Boxmaking joint (Finger Joint) I am working on the dovetail joint and hopefully I will have it ready for the show. There is only one jig with a number of fixtures added for each process required for individual joints. Also included is the making of small raised panels for small doors. One interesting joint is to produce a mitre with a sliding dovetail or a small tenon on the end of the mitre.
Anyone else getting into jig making for the construction of the various joints.
Depending on the interest at the wood show as to whether I take the time to write all the details required for the jig construction. There are numerous drawings that I have produced with detailed information.
I will be making a number of videos of the process and taking a large amount of photographs.
Tom
Anyone else getting into jig making for the construction of the various joints.
Depending on the interest at the wood show as to whether I take the time to write all the details required for the jig construction. There are numerous drawings that I have produced with detailed information.
I will be making a number of videos of the process and taking a large amount of photographs.
Tom