J jimbowley Established Member Joined 14 Nov 2008 Messages 24 Reaction score 5 18 Jan 2009 #1 Anyone know of a UK source for bare wood table pedestals, preferably turned, with 3 or 4 legs? I've googled for over 4 hours previously and can't find one supplier.
Anyone know of a UK source for bare wood table pedestals, preferably turned, with 3 or 4 legs? I've googled for over 4 hours previously and can't find one supplier.
Tom K Established Member Joined 19 Aug 2007 Messages 1,414 Reaction score 71 Location NW Kent 18 Jan 2009 #2 https://www.ukworkshop.co.uk/forums/view ... ht=#314067 Nah but this guy is looking too :lol:
R Richard Findley Established Member Joined 3 Feb 2008 Messages 1,508 Reaction score 1 Location Leicester 18 Jan 2009 #3 PM Sent
P philpolish Established Member Joined 26 Jul 2004 Messages 112 Reaction score 0 18 Jan 2009 #4 Hi there if its just pine pedestals you are after you can get them from turnstyle very cheap not on tinternet i think they are in nottingham.
Hi there if its just pine pedestals you are after you can get them from turnstyle very cheap not on tinternet i think they are in nottingham.
F frank Established Member Joined 10 Sep 2003 Messages 938 Reaction score 0 Location cheshire 18 Jan 2009 #5 jim try ray jones on 0151 228 3587 he may be able to help ,you may have seen him at the wood working shows. frank
jim try ray jones on 0151 228 3587 he may be able to help ,you may have seen him at the wood working shows. frank
P philpolish Established Member Joined 26 Jul 2004 Messages 112 Reaction score 0 18 Jan 2009 #6 here is address and phone number give them a ring they are really cheap sell legs knobs etc Turnstyle Ltd Claypole Lane Dry Doddington Newark NG235HZ Telephone:01400282342 Fax: 01400282353
here is address and phone number give them a ring they are really cheap sell legs knobs etc Turnstyle Ltd Claypole Lane Dry Doddington Newark NG235HZ Telephone:01400282342 Fax: 01400282353
B bluezephyr Established Member Joined 15 Jun 2008 Messages 210 Reaction score 0 Location Naarfolk Boi 18 Jan 2009 #7 Worldsource may do what youre after.
J jimbowley Established Member Joined 14 Nov 2008 Messages 24 Reaction score 5 18 Jan 2009 #8 thanks everyone. tommo, after posting I spotted that I'd asked before and that there was an answer but it's turned out good anyway.
thanks everyone. tommo, after posting I spotted that I'd asked before and that there was an answer but it's turned out good anyway.