Flip stop

[chippy1001]

Hi can anyone tell me where I can get a t track flip stop other than america

 

[Knot Competent]

You'll get a lot more satisfaction making yourself one, they're not difficult.

 

[Steve Maskery]

This is mine

 

[blackrodd]

Steve, And a very nice one too!
Did you know the link above, marked The complete tablesaw, actually leads to 3 vids for Bandsaw essentials?
Well it does on my old computer!!
Regards Rodders

 

[Steve Maskery]

Oh no it doesn't!

Thank you for the heads up. It's been like that for weeks...

 

[Wildman]

fine here

 

[Steve Maskery]

Told you so

 

[Steve Maskery]

If I were to make that flip stop again, I'd add a cursor.

That particular one is on the crosscut sled that I use to cut the cshoulders of tenons on my tablesaw. It's detailed on WE3, The Ultimate Tablesaw Tenon Jig.

The tape is set at zero at the cutting edge of the jig. But when I made it I used a standard 1/8" kerf blade. I now use a thin-kerf blade an so the scale is off by about 1/32". Had I used a cursor with elongated slots, I could have calibrated it to both standard and thin-kerf blades. Ah well, we live and learn.

It works very well as a flip-stop, though.

 

[Zeddedhed]

Kreg make a few models that work with their track system.

https://www.kregtool.com/?intl=1

 

[Shrubby]

Datum tools sell the original Flipstop
Matt

 

[Peter Sefton]

Hi can anyone tell me where I can get a t track flip stop other than america

What make are you looking for?

 

[JR147]

Axminster sell this one:

http://www.axminster.co.uk/ujk-technology-quickstop

 

[Steve Maskery]

I think Peter sells the Incra stuff, too.

Edit - and the Woodpecker range:
Clicky.