engineer one
Established Member
just picked up jun/jul2006 american woodworker.
nice article about detail sanders.
useful info roger soome of the more useful sanding
parts for the fein multimaster.
there seems to be a great profile device, i must see if there
is one available here too.
couple of other interesting articles one about using the kreg
or other pocket jigs for quick assemblies
and one about flattening larger boards than you have the
machinery for.
and finally some useful tips about using mitre saws,
nice tip about adding a board or two to the horizontal table
to increase the cross cut width by up to 1 inch, because it
takes you nearer the width of the blade. =D> \/
an odd magazine that every so often offers really good articles
and tips.
paul :wink:
nice article about detail sanders.
useful info roger soome of the more useful sanding
parts for the fein multimaster.
there seems to be a great profile device, i must see if there
is one available here too.
couple of other interesting articles one about using the kreg
or other pocket jigs for quick assemblies
and one about flattening larger boards than you have the
machinery for.
and finally some useful tips about using mitre saws,
nice tip about adding a board or two to the horizontal table
to increase the cross cut width by up to 1 inch, because it
takes you nearer the width of the blade. =D> \/
an odd magazine that every so often offers really good articles
and tips.
paul :wink: