Dusty
Established Member
Evening good folk , having read so much about it I am confuzzled !! The extractor / donar unit is 1HP but has an air flow rate of 800 Cubic Meters per hours .it is a very large beast of a motor and has 5" inlet and outlet and going by the spec from Axminster it seems a good powerful unit .
what my question is really , is would it be suitable for a rigid system of approx 6 to 8 meters ? will be fitting 110 soil predominintly to save funds but down sizing 100 flex for the P/T etc , runs of approx 1.5 . There will only be three bends all of which will be very large radius's , Purely for chip as the other tools run of a dedicated dust extractors .
Many thanks in advance
Sam
what my question is really , is would it be suitable for a rigid system of approx 6 to 8 meters ? will be fitting 110 soil predominintly to save funds but down sizing 100 flex for the P/T etc , runs of approx 1.5 . There will only be three bends all of which will be very large radius's , Purely for chip as the other tools run of a dedicated dust extractors .
Many thanks in advance
Sam
